|
|
| (15 intermediate revisions by 7 users not shown) |
| Line 1: |
Line 1: |
| − | [[Image:Nelson River Bipoles 1 and 2 Terminus at Rosser.jpg|thumb|right|300px|Long distance HVDC lines carrying [[hydropower]] from Canada's [[Nelson River Hydroelectric Project|Nelson river]] to this [[Static inverter plant|station]] where it is converted to AC for use in [[Winnipeg]]'s local grid]]
| |
| | | | |
| − | A '''high-voltage, direct current''' ('''HVDC''') [[electric power transmission]] system uses [[direct current]] for the bulk transmission of electrical power, in contrast with the more common [[alternating current]] systems. For long-distance distribution, HVDC systems are less expensive and suffer lower electrical losses. For shorter distances, the higher cost of DC conversion equipment compared to an AC system may be warranted where other benefits of direct current links are useful.
| + | = Overview<br/> = |
| | | | |
| − | The modern form of HVDC transmission uses technology developed extensively in the 1930s in [[Sweden]] at [[ASEA]]. Early commercial installations included one in the [[Soviet Union]] in 1951 between [[Moscow]] and [[Kashira]], and a 10-20 MW system in [[Gotland]], [[Sweden]] in 1954.<ref>Narain G. Hingorani in ''[http://ieeexplore.ieee.org/iel3/6/10407/00486634.pdf?tp=&arnumber=486634&isnumber=10407 IEEE Spectrum]'' magazine, 1996.</ref> The longest HVDC link in the world is currently the [[Inga-Shaba]] {{convert|1700|km|mi|abbr=on}} 600 MW link connecting the [[Inga Dam]] to the Shaba copper mine, in the [[Democratic Republic of Congo]].
| + | A '''high-voltage, direct current''' ('''HVDC''') Electric power transmission system uses direct current for the bulk transmission of electrical power, in contrast with the more common '''alternating current (AC)''' systems. For long-distance distribution, HVDC systems are less expensive and suffer lower electrical losses. For shorter distances, the higher cost of DC conversion equipment compared to an AC system may be warranted where other benefits of direct current links are useful. |
| | | | |
| − | [[Image:HVDC Europe.svg|thumb|right|350px|HVDC interconnections in western Europe - red are existing links, green are under construction, and blue are proposed. Many of these transfer power from renewable sources such as hydro and wind. For names, see also the [[List of HVDC projects#Europe|annotated version.]]]]
| + | The modern form of HVDC transmission uses technology developed extensively in the 1930s in Sweden at ASEA. Early commercial installations included one in the Soviet Union in 1951 between Moscow and Kashira, and a 10-20 MW system in Gotland, Sweden in 1954. The longest HVDC link in the world is currently the Inga-Shaba 600 MW link connecting the Inga Dam to the Shaba copper mine, in the Democratic Republic of Congo.<ref>Wikipedia: http://en.wikipedia.org/wiki/High-voltage direct currentfckLR</ref> |
| | | | |
| − | == High voltage transmission ==
| + | <br/> |
| − | High voltage is used for transmission to reduce the energy lost in the resistance of the wires. For a given quantity of power transmitted, higher voltage reduces the transmission power loss. Power in a circuit is proportional to the current, but the power lost as heat in the wires is proportional to the square of the current. However, power is also proportional to voltage, so for a given power level, higher voltage can be traded off for lower current. Thus, the higher the voltage, the lower the power loss. Power loss can also be reduced by reducing resistance, commonly achieved by increasing the diameter of the conductor; but larger conductors are heavier and more expensive.
| |
| | | | |
| − | High voltages cannot be easily used in lighting and motors, and so transmission-level voltage must be reduced to values compatible with end-use equipment. The [[transformer]], which only works with alternating current, is an efficient way to change voltages. The competition between the DC of [[Thomas Edison]] and the AC of [[Nikola Tesla]] and [[George Westinghouse]] was known as the [[War of Currents]], with AC emerging victorious. Practical manipulation of DC voltages only became possible with the development of high power electronic devices such as [[mercury arc valve]]s and later semiconductor devices, such as [[thyristor]]s, [[insulated-gate bipolar transistor]]s (IGBTs), high power capable [[MOSFET]]s (power metal–oxide–semiconductor field-effect transistors) and [[gate turn-off thyristor]]s (GTOs).
| + | = Further Information = |
| | | | |
| − | ==History of HVDC transmission ==
| + | *[http://en.wikipedia.org/wiki/High-voltage_direct_current Wikipedia: High-voltage direct current] |
| − | The first long-distance transmission of electric power was demonstrated using direct current in 1882 at the [[Miesbach-Munich Power Transmission]], but only 2.5 kW was transmitted. An early method of high-voltage DC transmission was developed by the Swiss engineer [[René Thury#The Thury system|Rene Thury]]<ref>Donald Beaty et al, "Standard Handbook for Electrical Engineers 11th Ed.", McGraw Hill, 1978</ref> and his method was put into practice by 1889 in [[Italy]] by the ''Acquedotto de Ferrari-Galliera'' company. This system used series-connected [[motor-generator]] sets to increase voltage. Each set was insulated from ground and driven by insulated shafts from a [[Wiktionary:prime mover|prime mover]]. The line was operated in constant current mode, with up to 5,000 volts on each machine, some machines having double [[commutator (electric)|commutators]] to reduce the voltage on each commutator. This system transmitted 630 kW at 14 kV DC over a distance of
| + | *[[Portal:Solar|Portal:Solar]] |
| − | 120 km.<ref>[http://www.myinsulators.com/acw/bookref/histsyscable/ ACW's Insulator Info - Book Reference Info - History of Electrical Systems and Cables]</ref><ref> R. M. Black ''The History of Electric Wires and Cables'', Peter Perigrinus, London 1983 ISBN 086341 001 4 pages 94-96</ref> The [[Lyon-Moutiers DC transmission scheme|Moutiers-Lyon]] system transmitted 8,600 kW of hydroelectric power a distance of 124 miles, including 6 miles of underground cable. The system used eight series-connected generators with dual commutators for a total voltage of 150,000 volts between the poles, and ran from about 1906 until 1936. Fifteen Thury systems were in operation by 1913 <ref> Alfred Still, ''Overhead Electric Power Transmission'', McGraw Hill, 1913 page 145, available from the [[Internet Archive]] </ref> Other Thury systems operating at up to 100 kV DC operated up to the 1930s, but the rotating machinery required high maintenance and had high energy loss. Various other [[Mechanical
| |
| − | rectifier|electromechanical devices]] were tested during the first half of the 20th century with little commercial success.<ref>[http://www.tema.liu.se/tema-t/sirp/PDF/322_5.pdf "Shaping the Tools of Competitive Power"]</ref>
| |
| | | | |
| − | One conversion technique attempted for conversion of direct current from a high transmission voltage to lower utilization voltage was to charge series-connected [[rechargeable battery|batteries]], then connect the batteries in parallel to serve distribution loads.<ref> Thomas P. Hughes, ''Networks of Power''</ref> While at least two commercial installations were tried around the turn of the 20th century, the technique was not generally useful owing to the limited capacity of batteries, difficulties in switching between series and parallel connections, and the inherent energy inefficiency of a battery charge/discharge cycle.
| + | = References<br/> = |
| | | | |
| − | [[Image:Mercury Arc Valve, Radisson Converter Station, Gillam MB.jpg|right|thumb|250px|HVDC in 1971: this 150 KV [[mercury arc valve]] converted AC [[hydropower]] voltage for transmission to distant cities from [[Manitoba Hydro]] generators.]] | + | *[http://en.wikipedia.org/wiki/High-voltage_direct_current Original Source Wikipedia] |
| | | | |
| − | The grid controlled [[mercury arc valve]] became available for power transmission during the period 1920 to 1940. Starting in 1932, [[General Electric]] tested mercury-vapor valves and a 12 kV DC transmission line, which also served to convert 40 Hz generation to serve 60 Hz loads, at [[Mechanicville, New York]]. In 1941, a 60 MW, +/-200 kV, 115 km buried cable link was designed for the city of [[Berlin]] using mercury arc valves ([[Elbe-Project]]), but owing to the collapse of the German government in 1945 the project was never completed.<ref>[http://www.rmst.co.il/HVDC_Proven_Technology.pdf "HVDC TransmissionF"]</ref> The nominal justification for the project was that, during wartime, a buried cable would be less conspicuous as a bombing target. The equipment was moved to the [[Soviet Union]] and was put into service there.<ref>[http://www.ieee.org/organizations/history_center/Che2004/DITTMANN.pdf IEEE - IEEE History Center]</ref>
| + | <references /> |
| | | | |
| − | Introduction of the fully-static mercury arc valve to commercial service in 1954 marked the beginning of the modern era of HVDC transmission. A HVDC-connection was constructed by [[ASEA]] between the mainland of Sweden and the island Gotland.
| |
| − | Mercury arc valves were common in systems designed up to 1975, but since then, HVDC systems use only [[solid-state device]]s. From 1975 to 2000, line-commutated converters (LCC) using [[thyristor]] valves were relied on. According to experts such as Vijay Sood, the next 25 years may well be dominated by force commutated converters, beginning with capacitor commutative converters (CCC) followed by self commutating converters which have largely supplanted LCC use.<ref name=sood1>{{cite book
| |
| − | |url=http://www.amazon.com/gp/reader/1402078900/ref=sib_fs_top?ie=UTF8&p=S00T&checkSum=kIuBlcbI0cpOJz1UiVfSKdIqFhPcDOXQ98WG3SabLpA%3D#reader-link
| |
| − | | title= HVDC and FACTS Controllers: Applications Of Static Converters In Power Systems
| |
| − | | author=Vijay K. Sood
| |
| − | |authorlink=http://www.engineering.uoit.ca/people/sood.php
| |
| − | | page=1
| |
| − | | publisher=Springer-Verlag
| |
| − | | isbn=978-1402078903
| |
| − | | quote= The first 25 years of HVDC transmission were sustained by converters having mercury arc valves till the mid-1970s. The next 25 years till the year 2000 were sustained by line-commutated converters using thyristor valves. It is predicted that the next 25 years will be dominated by force-commutated converters [4]. Initially, this new force-commutated era has commenced with Capacitor Commutated Converters (CCC) eventually to be replaced by self-commutated converters due to the economic availability of high power switching devices with their superior characteristics.}}</ref>
| |
| − | Since use of semiconductor commutators, hundreds of HVDC sea-cables have been laid and worked with high reliability, usually better than 96% of the time.
| |
| − |
| |
| − | == Advantages of HVDC over AC transmission ==
| |
| − |
| |
| − | The advantage of HVDC is the ability to transmit large amounts of power over long distances with lower capital costs and with lower losses than AC. Depending on voltage level and construction details, losses are quoted as about 3% per 1,000 km. High-voltage direct current transmission allows efficient use of energy sources remote from load centers.
| |
| − |
| |
| − | In a number of applications HVDC is more effective than AC transmission. Examples include:
| |
| − | * [[Submarine cable|Undersea cables]], where high capacitance causes additional AC losses. (e.g., 250 km [[Baltic Cable]] between [[Sweden]] and [[Germany]]<ref>[http://www.abb.com/hvdc ABB HVDC] website</ref>)
| |
| − | * Endpoint-to-endpoint long-haul bulk power transmission without intermediate 'taps', for example, in remote areas
| |
| − | * Increasing the capacity of an existing [[power grid]] in situations where additional wires are difficult or expensive to install
| |
| − | * Power transmission and stabilization between unsynchronised AC distribution systems
| |
| − | * Connecting a remote generating plant to the distribution grid, for example [[Nelson River Bipole]]
| |
| − | * Stabilizing a predominantly AC power-grid, without increasing [[prospective short circuit current]]
| |
| − | * Reducing line cost. HVDC needs fewer conductors as there is no need to support multiple phases. Also, thinner conductors can be used since HVDC does not suffer from the [[skin effect]]
| |
| − | * Facilitate power transmission between different countries that use AC at differing voltages and/or frequencies
| |
| − | * Synchronize AC produced by renewable energy sources
| |
| − |
| |
| − | Long undersea cables have a high [[capacitance]]. While this has minimal effect for DC transmission, the current required to charge and discharge the capacitance of the cable causes additional <math>I^2R</math> power losses when the cable is carrying AC. In addition, AC power is lost to [[dielectric]] losses.
| |
| − |
| |
| − | HVDC can carry more power per [[Conductor (material)|conductor]], because for a given power rating the constant voltage in a DC line is lower than the peak voltage in an AC line. In AC power, the [[root mean square]] (RMS) voltage measurement is considered the standard, but RMS is only about 71% of the peak voltage. The peak voltage of AC determines the actual insulation thickness and conductor spacing. Because DC operates at a constant maximum voltage without RMS, this allows existing transmission line corridors with equally sized conductors and insulation to carry 29% more power into an area of high power consumption than AC, which can lower costs.
| |
| − |
| |
| − | Because HVDC allows power transmission between unsynchronised AC distribution systems, it can help increase system stability, by preventing [[cascading failure]]s from propagating from one part of a wider power transmission grid to another. Changes in load that would cause portions of an AC network to become unsynchronized and separate would not similarly affect a DC link, and the power flow through the DC link would tend to stabilize the AC network. The magnitude and direction of power flow through a DC link can be directly commanded, and changed as needed to support the AC networks at either end of the DC link. This has caused many power system operators to contemplate wider use of HVDC technology for its stability benefits alone.
| |
| − |
| |
| − | == Disadvantages ==
| |
| − |
| |
| − | The disadvantages of HVDC are in conversion, switching and control.
| |
| − |
| |
| − | The required [[Static inverter plant|static inverters]] are expensive and have limited overload capacity. At smaller transmission distances the losses in the static inverters may be bigger than in an AC transmission line. The cost of the inverters may not be offset by reductions in line construction cost and lower line loss. With two exceptions, all former mercury rectifiers worldwide have been dismantled or replaced by thyristor units.
| |
| − |
| |
| − | In contrast to AC systems, realizing multiterminal systems is complex, as is expanding existing schemes to multiterminal systems. Controlling power flow in a multiterminal DC system requires good communication between all the terminals; power flow must be actively regulated by the control system instead of by the inherent properties of the transmission line. High voltage DC [[circuit breaker]]s are difficult to build because some mechanism must be included in the circuit breaker to force current to zero, otherwise arcing and contact wear would be too great to allow reliable switching. Multi-terminal lines are rare. One is in operation at the Hydro Québec - New England transmission from Radisson to Sandy Pond.<ref>{{cite web
| |
| − | |url= http://www.abb.com/cawp/gad02181/c1256d71001e0037c12568320062fdbc.aspx
| |
| − | |title= "HVDC multi-terminal system "
| |
| − | |date= 2008-10-23
| |
| − | |publisher=[[ABB Asea Brown Boveri]]
| |
| − | |accessdate= 2008-12-12 }} </ref>
| |
| − | Another example is the [[HVDC Italy-Corsica-Sardinia|Sardinia-mainland Italy]] link which was modified in 1989 to also provide power to the island of Corsica.<ref> ''The Corsican tapping: from design to commissioning tests of the third terminal of the Sardinia-Corsica-Italy HVDC''
| |
| − | Billon, V.C.; Taisne, J.P.; Arcidiacono, V.; Mazzoldi, F.;
| |
| − | Power Delivery, IEEE Transactions on
| |
| − | Volume 4, Issue 1, Jan. 1989 Page(s):794 - 799 </ref>
| |
| − |
| |
| − | == Costs of high voltage DC transmission ==
| |
| − | <!-- this is pretty specific and meaningless in the general case...better a cost comparison.-->
| |
| − | Normally manufacturers such as [[Areva|AREVA]], [[Siemens AG|Siemens]] and [[Asea Brown Boveri|ABB]] do not state specific cost information of a particular project since this is a commercial matter between the manufacturer and the client.
| |
| − |
| |
| − | Costs vary widely depending on the specifics of the project such as power rating, circuit length, overhead vs. underwater route, land costs, and AC network improvements required at either terminal. A detailed evaluation of DC vs. AC cost may be required where there is no clear technical advantage to DC alone and only economics drives the selection.
| |
| − |
| |
| − | However some practitioners have given out some information that can be reasonably well relied upon:
| |
| − |
| |
| − | {{quote|1=For an 8 GW 40 km link laid under the English Channel, the following are approximate primary equipment costs for a 2000 MW 500 kV bipolar conventional HVDC link (exclude way-leaving, on-shore reinforcement works, consenting, engineering, insurance, etc.)
| |
| − |
| |
| − | * Converter stations ~£110M
| |
| − | * Subsea cable + installation ~£1M/km
| |
| − |
| |
| − | So for an 8 GW capacity between England and France in four links, little is left over from £750M for the installed works. Add another £200–300M for the other works depending on additional onshore works required.<ref>[http://www.claverton-energy.com/ Source works for a prominent UK engineering consultancy but has asked to remain anonymous and is a member of Claverton Energy Research Group ] </ref>}}
| |
| − |
| |
| − | == Rectifying and inverting ==
| |
| − | === Components ===
| |
| − |
| |
| − | Early static systems used [[mercury arc rectifier]]s, which were unreliable. Two HVDC systems using [[mercury arc rectifier]]s are still in service ({{as of|2008}}). The [[thyristor]] valve was first used in HVDC systems in the 1960s. The thyristor is a solid-state [[semiconductor]] device similar to the [[diode]], but with an extra control terminal that is used to switch the device on at a particular instant during the AC cycle. The [[IGBT transistor|insulated-gate bipolar transistor]] (IGBT) is now also used and offers simpler control and reduced valve cost.
| |
| − |
| |
| − | Because the voltages in HVDC systems, up to 800 kV in some cases, exceed the [[breakdown voltage]]s of the semiconductor devices, HVDC converters are built using large numbers of semiconductors in series.
| |
| − |
| |
| − | The low-voltage control circuits used to switch the thyristors on and off need to be isolated from the high voltages present on the transmission lines. This is usually done optically. In a hybrid control system, the low-voltage control electronics sends light pulses along optical fibres to the ''high-side'' control electronics. Another system, called ''direct light triggering'', dispenses with the high-side electronics, instead using light pulses from the control electronics to switch light-triggered thyristors (LTTs).
| |
| − |
| |
| − | A complete switching element is commonly referred to as a ''valve'', irrespective of its construction.
| |
| − |
| |
| − | === Rectifying and inverting systems ===
| |
| − |
| |
| − | Rectification and inversion use essentially the same machinery. Many substations are set up in such a way that they can act as both rectifiers and inverters. At the AC end a set of transformers, often three physically separate single-phase transformers, isolate the station from the AC supply, to provide a local earth, and to ensure the correct eventual DC voltage. The output of these transformers is then connected to a bridge rectifier formed by a number of valves. The basic configuration uses six valves, connecting each of the three phases to each of the two DC rails. However, with a phase change only every sixty degrees, considerable harmonics remain on the DC rails.
| |
| − |
| |
| − | An enhancement of this configuration uses 12 valves (often known as a '''twelve-pulse system'''). The AC is split into two separate three phase supplies before transformation. One of the sets of supplies is then configured to have a star (wye) secondary, the other a delta secondary, establishing a thirty degree phase difference between the two sets of three phases. With twelve valves connecting each of the two sets of three phases to the two DC rails, there is a phase change every 30 degrees, and harmonics are considerably reduced.
| |
| − |
| |
| − | In addition to the conversion transformers and valve-sets, various passive resistive and reactive components help filter harmonics out of the DC rails.
| |
| − |
| |
| − | == Configurations ==
| |
| − | === Monopole and earth return ===
| |
| − |
| |
| − | In a common configuration, called monopole, one of the terminals of the rectifier is connected to earth ground. The other terminal, at a potential high above, or below, ground, is connected to a transmission line. The [[earth]]ed terminal may or may not be connected to the corresponding connection at the inverting station by means of a second conductor.
| |
| − |
| |
| − | If no metallic conductor is installed, current flows in the earth between the earth electrodes at the two stations. Therefore it is a type of [[single wire earth return]]. The issues surrounding earth-return current include
| |
| − |
| |
| − | * Electrochemical corrosion of long buried metal objects such as [[Pipeline transport|pipelines]]
| |
| − | * Underwater earth-return electrodes in seawater may produce [[chlorine]] or otherwise affect water chemistry.
| |
| − | * An unbalanced current path may result in a net magnetic field, which can affect magnetic [[navigation]]al [[compass]]es for ships passing over an underwater cable.
| |
| − |
| |
| − | These effects can be eliminated with installation of a metallic return conductor between the two ends of the monopolar transmission line. Since one terminal of the converters is connected to earth, the return conductor need not be insulated for the full transmission voltage which makes it less costly than the high-voltage conductor. Use of a metallic return conductor is decided based on economic, technical and environmental factors.<ref>[http://www.rpdc.tas.gov.au/projects_state_signif/Basslink Basslink] project</ref>
| |
| − |
| |
| − | Modern monopolar systems for pure overhead lines carry typically 1,500 MW.<ref>[http://www.siemens.com/hvdc Siemens AG - HVDC] website</ref> If underground or underwater cables are used the typical value is 600 MW.
| |
| − |
| |
| − | Most monopolar systems are designed for future bipolar expansion. Transmission line towers may be designed to carry two conductors, even if only one is used initially for the monopole transmission system.
| |
| − | The second conductor is either unused, used as [[electrode line]] or connected in parallel with the other (as in case of [[Baltic-Cable]]).
| |
| − |
| |
| − | ===Bipolar===
| |
| − | [[Image:HVDCPylons.jpg|thumb|250px|Bipolar system pylons of the [[Baltic-Cable]]-HVDC in Sweden]]In bipolar transmission a pair of conductors is used, each at a high potential with respect to ground, in opposite polarity. Since these conductors must be insulated for the full voltage, transmission line cost is higher than a monopole with a return conductor. However, there are a number of advantages to bipolar transmission which can make it the attractive option.
| |
| − |
| |
| − | * Under normal load, negligible earth-current flows, as in the case of monopolar transmission with a metallic earth-return. This reduces earth return loss and environmental effects.
| |
| − | * When a fault develops in a line, with earth return electrodes installed at each end of the line, approximately half the rated power can continue to flow using the earth as a return path, operating in monopolar mode.
| |
| − | * Since for a given total power rating each conductor of a bipolar line carries only half the current of monopolar lines, the cost of the second conductor is reduced compared to a monopolar line of the same rating.
| |
| − | * In very adverse terrain, the second conductor may be carried on an independent set of transmission towers, so that some power may continue to be transmitted even if one line is damaged.
| |
| − |
| |
| − | A bipolar system may also be installed with a metallic earth return conductor.
| |
| − |
| |
| − | Bipolar systems may carry as much as 3,000 MW at voltages of +/-533 kV. Submarine cable installations initially commissioned as a monopole may be upgraded with additional cables and operated as a bipole.
| |
| − |
| |
| − | ===Back to back===
| |
| − | A '''back-to-back station''' is a plant in which both static inverters and rectifiers are in the same area, usually in the same building. The length of the direct current line is kept as short as possible. HVDC back-to-back stations are used for
| |
| − | * coupling of electricity mains of different frequency (as in Japan)
| |
| − | * coupling two networks of the same nominal frequency but no fixed phase relationship (as until 1995/96 in [[Etzenricht]], [[GK Dürnrohr|Dürnrohr]] and [[GK Wien-Southeast|Vienna]]).
| |
| − | * different frequency and phase number (for example, as a replacement for [[traction current converter plant]]s)
| |
| − |
| |
| − | The DC voltage in the intermediate circuit can be selected freely at HVDC back-to-back stations because of the short conductor length. The DC voltage is as low as possible, in order to build a small valve hall and to avoid series connections of valves. For this reason at HVDC back-to-back stations valves with the highest available current rating are used.
| |
| − |
| |
| − | ===Systems with transmission lines===
| |
| − | The most common configuration of an HVDC link is two [[inverter (electrical)|inverter]]/[[rectifier]] stations connected by an [[overhead powerline]]. This is also a configuration commonly used in connecting unsynchronised grids, in long-haul power transmission, and in undersea cables.
| |
| − |
| |
| − | Multi-terminal HVDC links, connecting more than two points, are rare. The configuration of multiple terminals can be series, parallel, or hybrid (a mixture of series and parallel). Parallel configuration tends to be used for large capacity stations, and series for lower capacity stations. An example is the 2,000 MW [[Quebec - New England Transmission]] system opened in 1992, which is currently the largest multi-terminal HVDC system in the world.<ref>[http://www.abb.com/GLOBAL/GAD/GAD02181.NSF/viewUNID/C1256D71001E0037C12568340029B5C4!OpenDocument ABB HVDC Transmission Québec - New England] website</ref>
| |
| − |
| |
| − | ===Tripole: current-modulating control===
| |
| − | A newly patented scheme ({{as of|2004}}) ([http://www.freepatentsonline.com/6714427.html Current modulation of direct current transmission lines]) is intended for conversion of existing AC transmission lines to HVDC. Two of the three circuit conductors are operated as a bipole. The third conductor is used as a parallel monopole, equipped with reversing valves (or parallel valves connected in reverse polarity). The parallel monopole periodically relieves current from one pole or the other, switching polarity over a span of several minutes. The bipole conductors would be loaded to either 1.37 or 0.37 of their thermal limit, with the parallel monopole always carrying +/- 1 times its thermal limit current. The combined [[RMS]] heating effect is as if each of the conductors is always carrying 1.0 of its rated current. This allows heavier currents to be carried by the bipole conductors, and full use of the installed third conductor for energy transmission. High currents can be circulated through the line
| |
| − | conductors even when load demand is low, for removal of ice.
| |
| − |
| |
| − | Combined with the higher average power possible with a DC transmission line for the same line-to-ground voltage, a tripole conversion of an existing AC line could allow up to 80% more power to be transferred using the same transmission right-of-way, towers, and conductors. Some AC lines cannot be loaded to their thermal limit due to system stability, reliability, and reactive power concerns, which would not exist with an HVDC link.
| |
| − |
| |
| − | The system would operate without earth-return current. Since a single failure of a pole converter or a conductor results in only a small loss of capacity and no earth-return current, reliability of this scheme would be high, with no time required for switching.
| |
| − |
| |
| − | {{As of|2005}}, no tri-pole conversions are in operation, although a transmission line in [[India]] has been converted to bipole HVDC.
| |
| − |
| |
| − | ==Corona discharge==
| |
| − | [[Corona discharge]] is the creation of [[ion]]s in a [[fluid]] (such as [[Earth's atmosphere|air]]) by the presence of a strong [[electric field]]. [[Electron]]s are torn from neutral air, and either the positive ions or else the electrons are attracted to the conductor, while the charged particles drift. This effect can cause considerable power loss, create audible and radio-frequency interference, generate toxic compounds such as oxides of nitrogen and ozone, and bring forth arcing.
| |
| − |
| |
| − | Both AC and DC transmission lines can generate coronas, in the former case in the form of oscillating particles, in the latter a constant wind. Due to the [[space charge]] formed around the conductors, an HVDC system may have about half the loss per unit length of a high voltage AC system carrying the same amount of power. With monopolar transmission the choice of polarity of the energised conductor leads to a degree of control over the corona discharge. In particular, the polarity of the ions emitted can be controlled, which may have an environmental impact on [[particulate]] condensation. (particles of different polarities have a different mean-free path.) [[corona discharge|Negative coronas]] generate considerably more ozone than [[corona discharge|positive coronas]], and generate it further ''downwind'' of the power line, creating the potential for health effects. The use of a ''[[positive]]'' voltage will reduce the ozone impacts of monopole HVDC power lines.
| |
| − |
| |
| − | == Applications ==
| |
| − | ===Overview===
| |
| − | The controllability of current-flow through HVDC rectifiers and inverters, their application in connecting unsynchronized networks, and their applications in efficient submarine cables mean that HVDC cables are often used at national boundaries for the exchange of power. Offshore windfarms also require undersea cables, and their [[turbine]]s are unsynchronized. In very long-distance connections between just two points, for example around the remote communities of [[Siberia]], [[Canada]], and the [[Scandinavia]]n North, the decreased line-costs of HVDC also makes it the usual choice. Other applications have been noted throughout this article.
| |
| − |
| |
| − | ===AC network interconnections ===
| |
| − | AC transmission lines can only interconnect [[Wide area synchronous grid|synchronized AC networks]] that oscillate at the same frequency and in phase. Many areas that wish to share power have unsynchronized networks. The power grids of the [[United Kingdom|UK]], Northern Europe and continental Europe are not united into a single synchronized network. [[Japan]] has 50 Hz and 60 Hz networks. Continental North America, while operating at 60 Hz throughout, is divided into regions which are unsynchronised: [[Eastern Interconnection|East]], [[Western Interconnection|West]], [[Texas Interconnection|Texas]], [[Québec Interconnection|Quebec]], and [[Alaska Interconnection|Alaska]]. [[Brazil]] and [[Paraguay]], which share the enormous [[Itaipu]] hydroelectric plant, operate on 60 Hz and 50 Hz respectively. However, HVDC systems make it possible to interconnect unsynchronized AC networks, and also add the possibility of controlling AC voltage and reactive power flow.
| |
| − |
| |
| − | A [[Electrical generator|generator]] connected to a long AC transmission line may become unstable and fall out of synchronization with a distant AC power system. An HVDC transmission link may make it economically feasible to use remote generation sites. [[wind turbines|Wind farms]] located off-shore may use HVDC systems to collect power from multiple unsynchronized generators for transmission to the shore by an underwater cable.
| |
| − |
| |
| − | In general, however, an HVDC power line will interconnect two AC regions of the power-distribution grid. Machinery to convert between AC and DC power adds a considerable cost in power transmission. The conversion from AC to DC is known as [[rectifier|rectification]], and from DC to AC as [[inverter (electrical)|inversion]]. Above a certain break-even distance (about 50 km for submarine cables, and perhaps 600–800 km for overhead cables), the lower cost of the HVDC electrical conductors outweighs the cost of the electronics.
| |
| − |
| |
| − | The conversion electronics also present an opportunity to effectively manage the power grid by means of controlling the magnitude and direction of power flow. An additional advantage of the existence of HVDC links, therefore, is potential increased stability in the transmission grid.
| |
| − |
| |
| − | ===Renewable electricity superhighways ===
| |
| − | A number of studies have highlighted the potential benefits of very wide area [[super grid]]s based on HVDC since they can mitigate the effects of intermittency by averaging and smoothing the outputs of large numbers of geographically dispersed wind farms or solar farms.<ref>
| |
| − | {{cite paper
| |
| − | | url=http://www.iset.uni-kassel.de/abt/w3-w/projekte/LowCostEuropElSup_revised_for_AKE_2006.pdf
| |
| − | | title=Low Cost but Totally Renewable Electricity Supply for a Huge Supply Area – a European/Trans-European Example –
| |
| − | | author=Gregor Czisch
| |
| − | | work=2008 Claverton Energy conference
| |
| − | | format=pdf
| |
| − | | language=english
| |
| − | | publisher= [[University of Kassel]]
| |
| − | | date=2008-10-24
| |
| − | | accessdate=2008-07-16
| |
| − | }}
| |
| − | The paper was presented at the Claverton Energy conference in Bath, 24 October 2008.
| |
| − | [http://www.claverton-energy.com/common-affordable-and-renewable-electricity-supply-for-europe-and-its-neighbourhood.html Paper Synopsis]
| |
| − | </ref> Czisch's study concludes that a grid covering the fringes of Europe could bring 100% renewable power (70% wind, 30% biomass) at close to today's prices. There has been debate over the technical feasibility of this proposal<ref>http://www.claverton-energy.com/ttechnical-feasibility-of-complex-multi-terminal-hvdc-and-ideological-barriers-to-inter-country-exchanges.html</ref> and the political risks involved in energy transmission across a large number of international borders.<ref>http://www.claverton-energy.com/european-super-grid-2.html</ref><ref>http://www.claverton-energy.com/european-super-grid-2.html</ref>
| |
| − |
| |
| − | The construction of such green power superhighways is advocated in a [[white paper]] that was released by the [[American Wind Energy Association]] and the [[Solar Energy Industries Association]]<ref>http://www.awea.org/GreenPowerSuperhighways.pdf</ref>
| |
| − |
| |
| − | In January, the European Commission proposed €300 million to subsidize the development of HVDC links between Ireland, Britain, the Netherlands, Germany, Denmark, and Sweden, as part of a wider €1.2 billion package supporting links to offshore wind farms and cross-border interconnectors throughout Europe. Meanwhile the recently founded Union of the Mediterranean has embraced a Mediterranean Solar Plan to import large amounts of concentrating solar power into Europe from North Africa and the Middle East.<ref>[http://www.claverton-energy.com/energy-experts-library/downloads/interconnectors David Strahan "Green Grids" New Scientist 12 March 2009 ]</ref>
| |
| − |
| |
| − | ===Smaller scale use===
| |
| − | The development of [[IGBT transistor|insulated gate bipolar transistors (IGBT)]] and [[thyristor|gate turn-off thyristors (GTO)]] has made smaller HVDC systems economical. These may be installed in existing AC grids for their role in stabilizing power flow without the additional short-circuit current that would be produced by an additional AC transmission line. ABB manufacturer calls this concept "HVDC Light" and Siemens manufacturer calls a similar concept "HVDC PLUS" (Power Link Universal System). They have extended the use of HVDC down to blocks as small as a few tens of megawatts and lines as short as a few score kilometres of overhead line. The difference lies in the concept of the Voltage-Sourced Converter (VSC) technology whereas "HVDC Light" uses [[pulse width modulation]] and "HVDC PLUS" is based on multilevel switching.
| |
| | [[Category:Grid]] | | [[Category:Grid]] |
